gopro.md 1.9 KB
title: GoPro breadcrumbs:
- title: Media --- {% include header.md %}
GoPro HERO5 Black
- The phone app is really useful for display preview, control, settings etc.
- Supports clean HDMI out:
- Go to the settings (pull down) and set "HDMI output" to "live".
- The back display turns off.
- The FOV is really wide and it doesn't support dark environments too well.
GoPro HERO10 Black
- Needs the Media Mod (physical frame with mic, connectors and accessory rail) for HDMI output. This started with HERO8.
- Can not record with both the battery inserted and a charger connected (impractical for e.g. timelapses).
- Requires a proper phone charger, if not it will simply refuse to charge/stay on.
- The phone app is really useful for display preview, control, settings etc.
- Supports clean HDMI out:
- Must use the Media Mod for the actual HDMI port.
- The back display turns off.
- The FOV is really wide and it doesn't support dark environments too well.
- Other recommended settings:
- Video mode: Highest Quality (for more appropriate resolutions etc.)
- Resolution/etc.: Doesn't actually matter for live output.
- Lens/FOV: Whatever fits, but narrower means digital zoom and reduced quality.
- HyperSmooth: Standard or off
- White balance: Auto
- Color: Natural
- Media mod: Front (capture audio in front, using media mod mic)
- When connecting HDMI (without Labs):
- It starts in the gallery meny, press mode two times and capture once to exit.
- To hide the HUD, press mode four (ish) times to mark the blind eye, then capture to select it.
- Labs variant:
- Go to gopro.com/labs and follow the instructions for how to install the Labs firmware on the camera.
- If the app asks to upgrade the firmware, don't. It will overwrite the Labs firmware with the normal firmware.
- TODO Clean output?
{% include footer.md %}