HON95-wiki/config/linux-general/examples.md

---

title: Linux Examples breadcrumbs:

• title: Configuration
• title: Linux General --- {% include header.md %}

Commands

File Systems and Logical Volume Managers

• Partition disk: gdisk <dev> or fdisk <dev>
• Create filesystem: mkfs.<fs> <dev>
• Modify fstab:
  • Test it with mount -a to make sure it doesn't have errors that may cause boot to fail.
  • Run systemctl daemon-reload to avoid having systemd remount stuff that was removed from fstab or other weird shit.

Files

• Search:
  • By UID: find / -user <UID>
  • Without a user: find / -nouser
  • With setuid permission bit: find / -perm /4000
  • Recursive search and replace: find <dir> \( -type d -name .git -prune \) -o -type f -print0 | xargs -0 sed -i 's/123/456/g'
    • -type d -name .git -prune skips .git directories and can be excluded outside of git repos.
• Usage:
  • du -sh <dirs>
  • K4DirStat (GUI) (package k4dirstat)
• Shred files:
  • shred --remove --zero <file>

Fun

• Color text from STDIN: lolcat
• cowsay
• fortune

Installations and Packages

• Find packages depending on the package (APT): apt rdepends --installed <package>

Network

• Monitor usage:
  • nload <if>
  • iftop -i <if>
  • speedometer -t <if> -r <if> [...]
• Monitor per-process usage:
  • nethog
• Test throughput:
  • Internet: speedtest (the official one, not speedtest-cli)
  • Internal: iperf3
• Show sockets:
  • netstat -tulpn
    • tu for TCP and UDP, l for listening, p for protocol, n for numerical post numbers.
  • ss <options>
• Show interface stats:
  • ip [-s] link
  • netstat -i
• Show interfaces and addresses:
  • ip a (MAC, IPv4, IPv6)
• Show neighbors:
  • ip n
• Show routes:
  • ip r & ip -6 r
  • netstat -r
• Show multicast groups:
  • netstat -g
• Show misc. stats:
  • nstat
  • netstat -s (statistics)

Performance and Power Efficiency

• Set the CPU frequency scaling governor mode:
  • High performance: echo performance | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
  • Power save: echo powersave | ...
• Show current core frequencies: grep "cpu MHz" /proc/cpuinfo | cut -d' ' -f3

Processes and Memory

• Useful ps args: ps ax o uid,user:12,pid,comm

Security

• Show CPU vulnerabilities: tail -n +1 /sys/devices/system/cpu/vulnerabilities/*

Storage

• Test read speed: hdparm -t <dev> (safe)
• Show IO load for devices/partitions: iostat [-xpm] [refresh-interval]
• Show IO usage for processes: iotop -o [-a]

System

• Version info:
  • Release info files:
    • Debian (and Ubuntu): /etc/debian_version
    • RHEL: /etc/redhat-release
    • CentOS: /etc/centos-release
  • General release info: uname -a
  • Slightly more distro-specific release info: lsb_release -a
• Monitor a mix of everything:
  • glances
  • ytop
• Monitor system and processes:
  • htop
• Monitor interrupts:
  • irqtop
  • watch -n0.1 /proc/interrupts
• Stress test:
  • Stress CPU: stress-ng -c $(nproc) -t 600

Tasks

Burn Windows ISO

1. Install the graphical application woeusb from ppa:nilarimogard/webupd8.

Rip DVD to ISO

CDs and DVDs use 2048 byte sectors and may have both unintentional and intentional data errors. Some will explode in size when you try to rip them. There are multiple methods to try. I recommend using ddrescue since it's the simplest and because of its error handling features.

Install support for encrypted/protected DVDs:

• Enable the contrib or non-free repo areas (I'm not sure which).
• apt install libdvd-pkg && dpkg-reconfigure libdvd-pkg

Gather information about the disc:

• (Once) apt install genisoimage
• isoinfo -d -i /dev/sr0

Using dvdbackup

1. (Once) apt install dvdbackup
2. (Optional) Inspect the DVD: dvdbackup -i /dev/sr0 -I
3. Rip the whole DVD to a subdirectory: dvdbackup -i /dev/sr0 -o . -M
4. Make an ISO: genisoimage -dvd-video -udf -o <name>{.iso,}

Using vobcopy

1. (Once) apt install vobcopy
2. Mount the disc: mkdir -p /media/dvd && mount /dev/dvd /media/dvd
3. Rip it to the current dir: vobcopy -i /media/dvd -l -m
4. Unmount the disc: umount /media/dvd

Using dd

If the disc is damaged, use ddrescue instead.

1. Find sector size and count: isosize -x /dev/sr0
2. dd if=/dev/sr0 of=<name>.iso bs=2048 count=3659360 conv=noerror status=progress
   • conv=noerror prevents halting on error and writes zero to the output instead.

Using GNU ddrescue

ddrescue is a sophisticated recovery tool which gracefully handles read errors. When using a map file, it can be aborted and run multiple times and using different sources to try to fix corrupt sections. A typical way to use this method is to run it with fast options first and then optionally with slower options afterwards. When the output is a regular file, the corrupt sectors will contain zeros. This method can also be used to backup dying hard drives etc., but the options used below are for CD/DVD discs.

1. (Once) apt install gddrescue
2. Make sure the disk/disc is not mounted.
3. Run without scraping: ddrescue -n -b2048 /dev/sr0 <name>.{iso,map}
4. Run with direct access: ddrescue -d -r1 -b2048 /dev/sr0 <name>.{iso,map}

{% include footer.md %}