Merge pull request #491 from kavi-nikhurpa/booting-typo-fix

fix typos in "Booting"

Booting/linux-bootstrap-1.md

@@ -6,7 +6,7 @@ From the bootloader to the kernel
 
 If you have been reading my previous [blog posts](http://0xax.blogspot.com/search/label/asm), then you can see that, for some time, I have been starting to get involved in low-level programming. I have written some posts about x86_64 assembly programming for Linux and, at the same time, I have also started to dive into the Linux source code. I have a great interest in understanding how low-level things work, how programs run on my computer, how are they located in memory, how the kernel manages processes & memory, how the network stack works at a low level, and many many other things. So, I have decided to write yet another series of posts about the Linux kernel for **x86_64**.
 
-Note that I'm not a professional kernel hacker and I don't write code for the kernel at work. It's just a hobby. I just like low-level stuff, and it is interesting for me to see how these things work. So if you notice anything confusing, or if you have any questions/remarks, ping me on twitter [0xAX](https://twitter.com/0xAX), drop me an [email](anotherworldofworld@gmail.com) or just create an [issue](https://github.com/0xAX/linux-insides/issues/new). I appreciate it. All posts will also be accessible at [linux-insides](https://github.com/0xAX/linux-insides) and, if you find something wrong with my English or the post content, feel free to send a pull request.
+Note that I'm not a professional kernel hacker and I don't write code for the kernel at work. It's just a hobby. I just like low-level stuff, and it is interesting for me to see how these things work. So if you notice anything confusing, or if you have any questions/remarks, ping me on Twitter [0xAX](https://twitter.com/0xAX), drop me an [email](anotherworldofworld@gmail.com) or just create an [issue](https://github.com/0xAX/linux-insides/issues/new). I appreciate it. All posts will also be accessible at [linux-insides](https://github.com/0xAX/linux-insides) and, if you find something wrong with my English or the post content, feel free to send a pull request.
 
 
 *Note that this isn't official documentation, just learning and sharing knowledge.*
@@ -34,7 +34,7 @@ CS selector 0xf000
 CS base     0xffff0000
 ```
 
-The processor starts working in [real mode](https://en.wikipedia.org/wiki/Real_mode). Let's back up a little and try to understand memory segmentation in this mode. Real mode is supported on all x86-compatible processors, from the [8086](https://en.wikipedia.org/wiki/Intel_8086) all the way to the modern Intel 64-bit CPUs. The 8086 processor has a 20-bit address bus, which means that it could work with a 0-0xFFFFF address space (1 megabyte). But it only has 16-bit registers, which have a maximum address of `2^16 - 1` or `0xffff` (64 kilobytes). [Memory segmentation](http://en.wikipedia.org/wiki/Memory_segmentation) is used to make use of all the address space available. All memory is divided into small, fixed-size segments of 65536 bytes (64 KB). Since we cannot address memory above 64 KB with 16 bit registers, an alternate method is devised. An address consists of two parts: a segment selector, which has a base address, and an offset from this base address. In real mode, the associated base address of a segment selector is `Segment Selector * 16`. Thus, to get a physical address in memory, we need to multiply the segment selector part by 16 and add the offset:
+The processor starts working in [real mode](https://en.wikipedia.org/wiki/Real_mode). Let's back up a little and try to understand memory segmentation in this mode. Real mode is supported on all x86-compatible processors, from the [8086](https://en.wikipedia.org/wiki/Intel_8086) all the way to the modern Intel 64-bit CPUs. The 8086 processor has a 20-bit address bus, which means that it could work with a 0-0xFFFFF address space (1 megabyte). But it only has 16-bit registers, which have a maximum address of `2^16 - 1` or `0xffff` (64 kilobytes). [Memory segmentation](http://en.wikipedia.org/wiki/Memory_segmentation) is used to make use of all the address space available. All memory is divided into small, fixed-size segments of 65536 bytes (64 KB). Since we cannot address memory above 64 KB with 16-bit registers, an alternate method is devised. An address consists of two parts: a segment selector, which has a base address, and an offset from this base address. In real mode, the associated base address of a segment selector is `Segment Selector * 16`. Thus, to get a physical address in memory, we need to multiply the segment selector part by 16 and add the offset:
 
 ```
 PhysicalAddress = Segment Selector * 16 + Offset
@@ -79,7 +79,7 @@ reset_vector:
     ...
 ```
 
-Here we can see the `jmp` instruction [opcode](http://ref.x86asm.net/coder32.html#xE9), which is `0xe9`, and its destination address at `_start - ( . + 2)`. We can also see that the `reset` section is 16 bytes, and that it starts at `0xfffffff0`:
+Here we can see the `jmp` instruction [opcode](http://ref.x86asm.net/coder32.html#xE9), which is `0xe9`, and its destination address at `_start - ( . + 2)`. We can also see that the `reset` section is 16 bytes and that it starts at `0xfffffff0`:
 
 ```
 SECTIONS {
@@ -129,7 +129,7 @@ You will see:
 
 ![Simple bootloader which prints only `!`](http://oi60.tinypic.com/2qbwup0.jpg)
 
-In this example we can see that the code will be executed in 16 bit real mode and will start at `0x7c00` in memory. After starting, it calls the [0x10](http://www.ctyme.com/intr/rb-0106.htm) interrupt, which just prints the `!` symbol; it fills the remaining 510 bytes with zeros and finishes with the two magic bytes `0xaa` and `0x55`.
+In this example, we can see that the code will be executed in 16-bit real mode and will start at `0x7c00` in memory. After starting, it calls the [0x10](http://www.ctyme.com/intr/rb-0106.htm) interrupt, which just prints the `!` symbol; it fills the remaining 510 bytes with zeros and finishes with the two magic bytes `0xaa` and `0x55`.
 
 You can see a binary dump of this using the `objdump` utility:
 
@@ -146,14 +146,14 @@ A real-world boot sector has code for continuing the boot process and a partitio
 PhysicalAddress = Segment Selector * 16 + Offset
 ```
 
-just as explained before. We have only 16 bit general purpose registers; the maximum value of a 16 bit register is `0xffff`, so if we take the largest values, the result will be:
+just as explained before. We have only 16-bit general purpose registers; the maximum value of a 16-bit register is `0xffff`, so if we take the largest values, the result will be:
 
 ```python
 >>> hex((0xffff * 16) + 0xffff)
 '0x10ffef'
 ```
 
-where `0x10ffef` is equal to `1MB + 64KB - 16b`. A [8086](https://en.wikipedia.org/wiki/Intel_8086) processor (which was the first processor with real mode), in contrast, has a 20 bit address line. Since `2^20 = 1048576` is 1MB, this means that the actual available memory is 1MB.
+where `0x10ffef` is equal to `1MB + 64KB - 16b`. An [8086](https://en.wikipedia.org/wiki/Intel_8086) processor (which was the first processor with real mode), in contrast, has a 20-bit address line. Since `2^20 = 1048576` is 1MB, this means that the actual available memory is 1MB.
 
 General real mode's memory map is as follows:
 
@@ -202,7 +202,7 @@ hdr:
     boot_flag:   .word 0xAA55
 ```
 
-The bootloader must fill this and the rest of the headers (which are only marked as being type `write` in the Linux boot protocol, such as in [this example](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L354)) with values which it has either received from the  command line or calculated. (We will not go over full descriptions and explanations for all fields of the kernel setup header now but instead when the discuss how kernel uses them; you can find a description of all fields in the [boot protocol](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L156).)
+The bootloader must fill this and the rest of the headers (which are only marked as being type `write` in the Linux boot protocol, such as in [this example](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L354)) with values which it has either received from the command line or calculated. (We will not go over full descriptions and explanations for all fields of the kernel setup header now but instead when the discuss how kernel uses them; you can find a description of all fields in the [boot protocol](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L156).)
 
 As we can see in the kernel boot protocol, the memory map will be the following after loading the kernel:
 
@@ -308,7 +308,7 @@ _start:
     //
 ```
 
-Here we can see a `jmp` instruction opcode (`0xeb`) that jumps to the `start_of_setup-1f` point. In `Nf` notation, `2f` refers to the following local `2:` label; in our case, it is label `1` that is present right after jump, and it contains the rest of the setup [header](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L156). Right after the setup header, we see the `.entrytext` section, which starts at the `start_of_setup` label.
+Here we can see a `jmp` instruction opcode (`0xeb`) that jumps to the `start_of_setup-1f` point. In `Nf` notation, `2f` refers to the following local `2:` label; in our case, it is label `1` that is present right after the jump, and it contains the rest of the setup [header](https://github.com/torvalds/linux/blob/master/Documentation/x86/boot.txt#L156). Right after the setup header, we see the `.entrytext` section, which starts at the `start_of_setup` label.
 
 This is the first code that actually runs (aside from the previous jump instructions, of course). After the kernel setup received control from the bootloader, the first `jmp` instruction is located at the `0x200` offset from the start of the kernel real mode, i.e., after the first 512 bytes. This we can both read in the Linux kernel boot protocol and see in the grub2 source code:
 
@@ -363,7 +363,7 @@ _start:
     lretw
 ```
 
-which pushes the value of `ds` to the stack with the address of the [6](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L494) label and executes the `lretw` instruction. When the `lretw` instruction is called, it loads the address of label `6` into the [instruction pointer](https://en.wikipedia.org/wiki/Program_counter) register and loads `cs` with the value of `ds`. Afterwards, `ds` and `cs` will have the same values.
+which pushes the value of `ds` to the stack with the address of the [6](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L494) label and executes the `lretw` instruction. When the `lretw` instruction is called, it loads the address of label `6` into the [instruction pointer](https://en.wikipedia.org/wiki/Program_counter) register and loads `cs` with the value of `ds`. Afterward, `ds` and `cs` will have the same values.
 
 Stack Setup
 --------------------------------------------------------------------------------
@@ -473,7 +473,7 @@ The `main()` function is located in [arch/x86/boot/main.c](https://github.com/to
 Conclusion
 --------------------------------------------------------------------------------
 
-This is the end of the first part about Linux kernel insides. If you have questions or suggestions, ping me on twitter [0xAX](https://twitter.com/0xAX), drop me an [email](anotherworldofworld@gmail.com), or just create an [issue](https://github.com/0xAX/linux-internals/issues/new). In the next part, we will see the first C code that executes in the Linux kernel setup, the implementation of memory routines such as `memset`, `memcpy`, `earlyprintk`, early console implementation and initialization, and much more.
+This is the end of the first part about Linux kernel insides. If you have questions or suggestions, ping me on Twitter [0xAX](https://twitter.com/0xAX), drop me an [email](anotherworldofworld@gmail.com), or just create an [issue](https://github.com/0xAX/linux-internals/issues/new). In the next part, we will see the first C code that executes in the Linux kernel setup, the implementation of memory routines such as `memset`, `memcpy`, `earlyprintk`, early console implementation and initialization, and much more.
 
 **Please note that English is not my first language and I am really sorry for any inconvenience. If you find any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-internals).**
 

Booting/linux-bootstrap-2.md

@@ -4,13 +4,13 @@ Kernel booting process. Part 2.
 First steps in the kernel setup
 --------------------------------------------------------------------------------
 
-We started to dive into linux kernel insides in the previous [part](linux-bootstrap-1.md) and saw the initial part of the kernel setup code. We stopped at the first call to the `main` function (which is the first function written in C) from [arch/x86/boot/main.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/main.c). 
+We started to dive into linux kernel insides in the previous [part](linux-bootstrap-1.md) and saw the initial part of the kernel setup code. We stopped at the first call to the `main` function (which is the first function written in C) from [arch/x86/boot/main.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/main.c).
 
-In this part we will continue to research the kernel setup code and 
+In this part, we will continue to research the kernel setup code and
 * see what `protected mode` is,
 * some preparation for the transition into it,
 * the heap and console initialization,
-* memory detection, cpu validation, keyboard initialization
+* memory detection, CPU validation, keyboard initialization
 * and much much more.
 
 So, Let's go ahead.
@@ -24,14 +24,14 @@ What is [protected mode](https://en.wikipedia.org/wiki/Protected_mode)? Protecte
 
 The main reason to move away from [Real mode](http://wiki.osdev.org/Real_Mode) is that there is very limited access to the RAM. As you may remember from the previous part, there is only 2<sup>20</sup> bytes or 1 Megabyte, sometimes even only 640 Kilobytes of RAM available in the Real mode.
 
-Protected mode brought many changes, but the main one is the difference in memory management. The 20-bit address bus was replaced with a 32-bit address bus. It allowed access to 4 Gigabytes of memory vs 1 Megabyte of real mode. Also [paging](http://en.wikipedia.org/wiki/Paging) support was added, which you can read about in the next sections.
+Protected mode brought many changes, but the main one is the difference in memory management. The 20-bit address bus was replaced with a 32-bit address bus. It allowed access to 4 Gigabytes of memory vs 1 Megabyte of real mode. Also, [paging](http://en.wikipedia.org/wiki/Paging) support was added, which you can read about in the next sections.
 
 Memory management in Protected mode is divided into two, almost independent parts:
 
 * Segmentation
 * Paging
 
-Here we will only see segmentation. Paging will be discussed in the next sections. 
+Here we will only see segmentation. Paging will be discussed in the next sections.
 
 As you can read in the previous part, addresses consist of two parts in real mode:
 
@@ -83,13 +83,13 @@ Don't worry, I know it looks a little scary after real mode, but it's easy. For
 
   So, it means that if
   * if G is 0, Limit is interpreted in terms of 1 Byte and the maximum size of the segment can be 1 Megabyte.
-  * if G is 1, Limit is interpreted in terms of 4096 Bytes = 4 KBytes = 1 Page and the maximum size of the segment can be 4 Gigabytes. Actually when G is 1, the value of Limit is shifted to the left by 12 bits. So, 20 bits + 12 bits = 32 bits and 2<sup>32</sup> = 4 Gigabytes.
+  * if G is 1, Limit is interpreted in terms of 4096 Bytes = 4 KBytes = 1 Page and the maximum size of the segment can be 4 Gigabytes. Actually, when G is 1, the value of Limit is shifted to the left by 12 bits. So, 20 bits + 12 bits = 32 bits and 2<sup>32</sup> = 4 Gigabytes.
 
 2. Base[32-bits] is at (0-15, 32-39 and 56-63 bits). It defines the physical address of the segment's starting location.
 
-3. Type/Attribute (40-47 bits) defines the type of segment and kinds of access to it. 
+3. Type/Attribute (40-47 bits) defines the type of segment and kinds of access to it.
   * `S` flag at bit 44 specifies descriptor type. If `S` is 0 then this segment is a system segment, whereas if `S` is 1 then this is a code or data segment (Stack segments are data segments which must be read/write segments).
-  
+
 To determine if the segment is a code or data segment we can check its Ex(bit 43) Attribute marked as 0 in the above diagram. If it is 0, then the segment is a Data segment otherwise it is a code segment.
 
 A segment can be of one of the following types:
@@ -119,7 +119,7 @@ A segment can be of one of the following types:
 ```
 
 As we can see the first bit(bit 43) is `0` for a _data_ segment and `1` for a _code_ segment. The next three bits (40, 41, 42) are either `EWA`(*E*xpansion *W*ritable *A*ccessible) or CRA(*C*onforming *R*eadable *A*ccessible).
-  * if E(bit 42) is 0, expand up other wise expand down. Read more [here](http://www.sudleyplace.com/dpmione/expanddown.html).
+  * if E(bit 42) is 0, expand up otherwise expand down. Read more [here](http://www.sudleyplace.com/dpmione/expanddown.html).
   * if W(bit 41)(for Data Segments) is 1, write access is allowed otherwise not. Note that read access is always allowed on data segments.
   * A(bit 40) - Whether the segment is accessed by processor or not.
   * C(bit 43) is conforming bit(for code selectors). If C is 1, the segment code can be executed from a lower level privilege e.g. user level. If C is 0, it can only be executed from the same privilege level.
@@ -131,7 +131,7 @@ As we can see the first bit(bit 43) is `0` for a _data_ segment and `1` for a _c
 
 6. AVL flag(bit 52) - Available and reserved bits. It is ignored in Linux.
 
-7. L flag(bit 53) - indicates whether a code segment contains native 64-bit code. If 1 then the code segment executes in 64 bit mode.
+7. L flag(bit 53) - indicates whether a code segment contains native 64-bit code. If 1 then the code segment executes in 64-bit mode.
 
 8. D/B flag(bit 54) - Default/Big flag represents the operand size i.e 16/32 bits. If it is set then 32 bit otherwise 16.
 
@@ -152,7 +152,7 @@ Where,
 Every segment register has a visible and hidden part.
 * Visible - Segment Selector is stored here
 * Hidden - Segment Descriptor(base, limit, attributes, flags)
- 
+
 The following steps are needed to get the physical address in the protected mode:
 
 * The segment selector must be loaded in one of the segment registers
@@ -205,7 +205,7 @@ GLOBAL(memcpy)
 ENDPROC(memcpy)
 ```
 
-Yeah, we just moved to C code and now assembly again :) First of all we can see that `memcpy` and other routines which are defined here, start and end with the two macros: `GLOBAL` and `ENDPROC`. `GLOBAL` is described in [arch/x86/include/asm/linkage.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/linkage.h) which defines `globl` directive and the label for it. `ENDPROC` is described in [include/linux/linkage.h](https://github.com/torvalds/linux/blob/master/include/linux/linkage.h) which marks the `name` symbol as a function name and ends with the size of the `name` symbol.
+Yeah, we just moved to C code and now assembly again :) First of all, we can see that `memcpy` and other routines which are defined here, start and end with the two macros: `GLOBAL` and `ENDPROC`. `GLOBAL` is described in [arch/x86/include/asm/linkage.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/linkage.h) which defines `globl` directive and the label for it. `ENDPROC` is described in [include/linux/linkage.h](https://github.com/torvalds/linux/blob/master/include/linux/linkage.h) which marks the `name` symbol as a function name and ends with the size of the `name` symbol.
 
 Implementation of `memcpy` is easy. At first, it pushes values from the `si` and `di` registers to the stack to preserve their values because they will change during the `memcpy`. `memcpy` (and other functions in copy.S) use `fastcall` calling conventions. So it gets its incoming parameters from the `ax`, `dx` and `cx` registers.  Calling `memcpy` looks like this:
 
@@ -218,14 +218,14 @@ So,
 * `dx` will contain the address of `hdr`
 * `cx` will contain the size of `hdr` in bytes.
 
-`memcpy` puts the address of `boot_params.hdr` into `di` and saves the size on the stack. After this it shifts to the right on 2 size (or divide on 4) and copies from `si` to `di` by 4 bytes. After this we restore the size of `hdr` again, align it by 4 bytes and copy the rest of the bytes from `si` to `di` byte by byte (if there is more). Restore `si` and `di` values from the stack in the end and after this copying is finished.
+`memcpy` puts the address of `boot_params.hdr` into `di` and saves the size on the stack. After this it shifts to the right on 2 size (or divide on 4) and copies from `si` to `di` by 4 bytes. After this, we restore the size of `hdr` again, align it by 4 bytes and copy the rest of the bytes from `si` to `di` byte by byte (if there is more). Restore `si` and `di` values from the stack in the end and after this copying is finished.
 
 Console initialization
 --------------------------------------------------------------------------------
 
 After `hdr` is copied into `boot_params.hdr`, the next step is console initialization by calling the `console_init` function which is defined in [arch/x86/boot/early_serial_console.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/early_serial_console.c).
 
-It tries to find the `earlyprintk` option in the command line and if the search was successful, it parses the port address and baud rate of the serial port and initializes the serial port. Value of `earlyprintk` command line option can be one of these:
+It tries to find the `earlyprintk` option in the command line and if the search was successful, it parses the port address and baud rate of the serial port and initializes the serial port. The value of `earlyprintk` command line option can be one of these:
 
 * serial,0x3f8,115200
 * serial,ttyS0,115200
@@ -334,7 +334,7 @@ Then there is the `heap_end` calculation:
 ```
 which means `heap_end_ptr` or `_end` + `512`(`0x200h`). The last check is whether `heap_end` is greater than `stack_end`. If it is then `stack_end` is assigned to `heap_end` to make them equal.
 
-Now the heap is initialized and we can use it using the `GET_HEAP` method. We will see how it is used, how to use it and how the it is implemented in the next posts.
+Now the heap is initialized and we can use it using the `GET_HEAP` method. We will see how it is used, how to use it and how it is implemented in the next posts.
 
 CPU validation
 --------------------------------------------------------------------------------
@@ -349,12 +349,12 @@ if (cpu_level < req_level) {
     return -1;
 }
 ```
-`check_cpu` checks the cpu's flags, presence of [long mode](http://en.wikipedia.org/wiki/Long_mode) in case of x86_64(64-bit) CPU, checks the processor's vendor and makes preparation for certain vendors like turning off SSE+SSE2 for AMD if they are missing, etc.
+`check_cpu` checks the CPU's flags, the presence of [long mode](http://en.wikipedia.org/wiki/Long_mode) in the case of x86_64(64-bit) CPU, checks the processor's vendor and makes preparation for certain vendors like turning off SSE+SSE2 for AMD if they are missing, etc.
 
 Memory detection
 --------------------------------------------------------------------------------
 
-The next step is memory detection by the `detect_memory` function. `detect_memory` basically provides a map of available RAM to the cpu. It uses different programming interfaces for memory detection like `0xe820`, `0xe801` and `0x88`. We will see only the implementation of **0xE820** here.
+The next step is memory detection by the `detect_memory` function. `detect_memory` basically provides a map of available RAM to the CPU. It uses different programming interfaces for memory detection like `0xe820`, `0xe801` and `0x88`. We will see only the implementation of **0xE820** here.
 
 Let's look into the `detect_memory_e820` implementation from the [arch/x86/boot/memory.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/memory.c) source file. First of all, the `detect_memory_e820` function initializes the `biosregs` structure as we saw above and fills registers with special values for the `0xe820` call:
 
@@ -416,7 +416,7 @@ After this it calls [0x16](http://www.ctyme.com/intr/rb-1757.htm) again to set r
 Querying
 --------------------------------------------------------------------------------
 
-The next couple of steps are queries for different parameters. We will not dive into details about these queries, but will get back to it in later parts. Let's take a short look at these functions:
+The next couple of steps are queries for different parameters. We will not dive into details about these queries but will get back to it in later parts. Let's take a short look at these functions:
 
 The [query_mca](https://github.com/torvalds/linux/blob/master/arch/x86/boot/mca.c#L18) routine calls the [0x15](http://www.ctyme.com/intr/rb-1594.htm) BIOS interrupt to get the machine model number, sub-model number, BIOS revision level, and other hardware-specific attributes:
 
@@ -444,7 +444,7 @@ int query_mca(void)
 }
 ```
 
-It fills  the `ah` register with `0xc0` and calls the `0x15` BIOS interruption. After the interrupt execution it checks  the [carry flag](http://en.wikipedia.org/wiki/Carry_flag) and if it is set to 1, the BIOS doesn't support [**MCA**](https://en.wikipedia.org/wiki/Micro_Channel_architecture). If carry flag is set to 0, `ES:BX` will contain a pointer to the system information table, which looks like this:
+It fills the `ah` register with `0xc0` and calls the `0x15` BIOS interruption. After the interrupt execution it checks the [carry flag](http://en.wikipedia.org/wiki/Carry_flag) and if it is set to 1, the BIOS doesn't support [**MCA**](https://en.wikipedia.org/wiki/Micro_Channel_architecture). If carry flag is set to 0, `ES:BX` will contain a pointer to the system information table, which looks like this:
 
 ```
 Offset  Size    Description
@@ -473,7 +473,7 @@ Offset  Size    Description
  13h  3 BYTEs   "JPN"
  ```
 
-Next we call the `set_fs` routine and pass the value of the `es` register to it. The implementation of `set_fs` is pretty simple:
+Next, we call the `set_fs` routine and pass the value of the `es` register to it. The implementation of `set_fs` is pretty simple:
 
 ```c
 static inline void set_fs(u16 seg)
@@ -486,11 +486,11 @@ This function contains inline assembly which gets the value of the `seg` paramet
 
 At the end of `query_mca` it just copies the table pointed to by `es:bx` to the `boot_params.sys_desc_table`.
 
-The next step is getting [Intel SpeedStep](http://en.wikipedia.org/wiki/SpeedStep) information by calling the `query_ist` function. First of all it checks the CPU level and if it is correct, calls `0x15` for getting info and saves the result to `boot_params`.
+The next step is getting [Intel SpeedStep](http://en.wikipedia.org/wiki/SpeedStep) information by calling the `query_ist` function. First of all, it checks the CPU level and if it is correct, calls `0x15` for getting info and saves the result to `boot_params`.
 
 The following [query_apm_bios](https://github.com/torvalds/linux/blob/master/arch/x86/boot/apm.c#L21) function gets [Advanced Power Management](http://en.wikipedia.org/wiki/Advanced_Power_Management) information from the BIOS. `query_apm_bios` calls the `0x15` BIOS interruption too, but with `ah` = `0x53` to check `APM` installation. After the `0x15` execution, `query_apm_bios` functions check the `PM` signature (it must be `0x504d`), carry flag (it must be 0 if `APM` supported) and value of the `cx` register (if it's 0x02, protected mode interface is supported).
 
-Next it calls `0x15` again, but with `ax = 0x5304` for disconnecting the `APM` interface and connecting the 32-bit protected mode interface. In the end it fills `boot_params.apm_bios_info` with values obtained from the BIOS.
+Next, it calls `0x15` again, but with `ax = 0x5304` for disconnecting the `APM` interface and connecting the 32-bit protected mode interface. In the end, it fills `boot_params.apm_bios_info` with values obtained from the BIOS.
 
 Note that `query_apm_bios` will be executed only if `CONFIG_APM` or `CONFIG_APM_MODULE` was set in the configuration file:
 
@@ -502,7 +502,7 @@ Note that `query_apm_bios` will be executed only if `CONFIG_APM` or `CONFIG_APM_
 
 The last is the [`query_edd`](https://github.com/torvalds/linux/blob/master/arch/x86/boot/edd.c#L122) function, which queries `Enhanced Disk Drive` information from the BIOS. Let's look into the `query_edd` implementation.
 
-First of all it reads the [edd](https://github.com/torvalds/linux/blob/master/Documentation/kernel-parameters.txt#L1023) option from the kernel's command line and if it was set to `off` then `query_edd` just returns.
+First of all, it reads the [edd](https://github.com/torvalds/linux/blob/master/Documentation/kernel-parameters.txt#L1023) option from the kernel's command line and if it was set to `off` then `query_edd` just returns.
 
 If EDD is enabled, `query_edd` goes over BIOS-supported hard disks and queries EDD information in the following loop:
 
@@ -515,7 +515,7 @@ for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) {
     }
     ...
     ...
-    ... 
+    ...
     }
 ```
 
@@ -524,7 +524,7 @@ where `0x80` is the first hard drive and the value of `EDD_MBR_SIG_MAX` macro is
 Conclusion
 --------------------------------------------------------------------------------
 
-This is the end of the second part about Linux kernel insides. In the next part we will see video mode setting and the rest of preparations before transition to protected mode and directly transitioning into it.
+This is the end of the second part about Linux kernel insides. In the next part, we will see video mode setting and the rest of preparations before the transition to protected mode and directly transitioning into it.
 
 If you have any questions or suggestions write me a comment or ping me at [twitter](https://twitter.com/0xAX).
 
@@ -546,4 +546,3 @@ Links
 * [EDD specification](http://www.t13.org/documents/UploadedDocuments/docs2004/d1572r3-EDD3.pdf)
 * [TLDP documentation for Linux Boot Process](http://www.tldp.org/HOWTO/Linux-i386-Boot-Code-HOWTO/setup.html) (old)
 * [Previous Part](linux-bootstrap-1.md)
-

Booting/linux-bootstrap-3.md

@@ -9,7 +9,7 @@ This is the third part of the `Kernel booting process` series. In the previous [
 - preparation before switching into protected mode,
 - transition to protected mode
 
-**NOTE** If you don't know anything about protected mode, you can find some information about it in the previous [part](linux-bootstrap-2.md#protected-mode). Also there are a couple of [links](linux-bootstrap-2.md#links) which can help you.
+**NOTE** If you don't know anything about protected mode, you can find some information about it in the previous [part](linux-bootstrap-2.md#protected-mode). Also, there are a couple of [links](linux-bootstrap-2.md#links) which can help you.
 
 As I wrote above, we will start from the `set_video` function which is defined in the [arch/x86/boot/video.c](https://github.com/torvalds/linux/blob/master/arch/x86/boot/video.c#L315) source code file. We can see that it starts by first getting the video mode from the `boot_params.hdr` structure:
 
@@ -99,7 +99,7 @@ static inline char *__get_heap(size_t s, size_t a, size_t n)
 }
 ```
 
-and further we will see its usage, something like:
+and we will further see its usage, something like:
 
 ```C
 saved.data = GET_HEAP(u16, saved.x * saved.y);
@@ -127,9 +127,9 @@ Now we can move directly to video mode initialization. We stopped at the `RESET_
 
 If we look at the `store_mode_params` function, we can see that it starts with the call to the `store_cursor_position` function. As you can understand from the function name, it gets information about cursor and stores it.
 
-First of all `store_cursor_position` initializes two variables which have type `biosregs` with `AH = 0x3`, and calls `0x10` BIOS interruption. After the interruption is successfully executed, it returns row and column in the `DL` and `DH` registers. Row and column will be stored in the `orig_x` and `orig_y` fields from the `boot_params.screen_info` structure.
+First of all, `store_cursor_position` initializes two variables which have type `biosregs` with `AH = 0x3`, and calls `0x10` BIOS interruption. After the interruption is successfully executed, it returns row and column in the `DL` and `DH` registers. Row and column will be stored in the `orig_x` and `orig_y` fields from the `boot_params.screen_info` structure.
 
-After `store_cursor_position` is executed, the `store_video_mode` function will be called. It just gets the current video mode and stores it in `boot_params.screen_info.orig_video_mode`. 
+After `store_cursor_position` is executed, the `store_video_mode` function will be called. It just gets the current video mode and stores it in `boot_params.screen_info.orig_video_mode`.
 
 After this, it checks the current video mode and sets the `video_segment`. After the BIOS transfers control to the boot sector, the following addresses are for video memory:
 
@@ -146,14 +146,14 @@ font_size = rdfs16(0x485);
 boot_params.screen_info.orig_video_points = font_size;
 ```
 
-First of all we put 0 in the `FS` register with the `set_fs` function. We already saw functions like `set_fs` in the previous part. They are all defined in [boot.h](https://github.com/0xAX/linux/blob/master/arch/x86/boot/boot.h). Next we read the value which is located at address `0x485` (this memory location is used to get the font size) and save the font size in `boot_params.screen_info.orig_video_points`.
+First of all, we put 0 in the `FS` register with the `set_fs` function. We already saw functions like `set_fs` in the previous part. They are all defined in [boot.h](https://github.com/0xAX/linux/blob/master/arch/x86/boot/boot.h). Next, we read the value which is located at address `0x485` (this memory location is used to get the font size) and save the font size in `boot_params.screen_info.orig_video_points`.
 
 ```
  x = rdfs16(0x44a);
  y = (adapter == ADAPTER_CGA) ? 25 : rdfs8(0x484)+1;
 ```
 
-Next we get the amount of columns by address `0x44a` and rows by address `0x484` and store them in `boot_params.screen_info.orig_video_cols` and `boot_params.screen_info.orig_video_lines`. After this, execution of `store_mode_params` is finished.
+Next, we get the amount of columns by address `0x44a` and rows by address `0x484` and store them in `boot_params.screen_info.orig_video_cols` and `boot_params.screen_info.orig_video_lines`. After this, execution of `store_mode_params` is finished.
 
 Next we can see the `save_screen` function which just saves screen content to the heap. This function collects all data which we got in the previous functions like rows and columns amount etc. and stores it in the `saved_screen` structure, which is defined as:
 
@@ -182,7 +182,7 @@ for (card = video_cards; card < video_cards_end; card++) {
 }
 ```
 
-but `video_cards` is not declared anywhere. Answer is simple: Every video mode presented in the x86 kernel setup code has definition like this:
+but `video_cards` is not declared anywhere. The answer is simple: every video mode presented in the x86 kernel setup code has definition like this:
 
 ```C
 static __videocard video_vga = {
@@ -223,11 +223,11 @@ is in the `.videocards` segment. Let's look in the [arch/x86/boot/setup.ld](http
 	}
 ```
 
-It means that `video_cards` is just a memory address and all `card_info` structures are placed in this  segment. It means that all `card_info` structures are placed between `video_cards` and `video_cards_end`, so we can use it in a loop to go over all of it.  After `probe_cards` executes we have all structures like `static __videocard video_vga` with filled `nmodes` (number of video modes).
+It means that `video_cards` is just a memory address and all `card_info` structures are placed in this segment. It means that all `card_info` structures are placed between `video_cards` and `video_cards_end`, so we can use it in a loop to go over all of it.  After `probe_cards` executes we have all structures like `static __videocard video_vga` with filled `nmodes` (number of video modes).
 
-After `probe_cards` execution is finished, we move to the main loop in the `set_video` function. There is an infinite loop which tries to set up video mode with the `set_mode` function or prints a menu if we passed `vid_mode=ask` to the kernel command line or video mode is undefined. 
+After `probe_cards` execution is finished, we move to the main loop in the `set_video` function. There is an infinite loop which tries to set up video mode with the `set_mode` function or prints a menu if we passed `vid_mode=ask` to the kernel command line or video mode is undefined.
 
-The `set_mode` function is defined in [video-mode.c](https://github.com/0xAX/linux/blob/master/arch/x86/boot/video-mode.c#L147) and gets only one parameter, `mode`, which is the number of video modes (we got it from the menu or in the start of `setup_video`, from the kernel setup header). 
+The `set_mode` function is defined in [video-mode.c](https://github.com/0xAX/linux/blob/master/arch/x86/boot/video-mode.c#L147) and gets only one parameter, `mode`, which is the number of video modes (we got it from the menu or in the start of `setup_video`, from the kernel setup header).
 
 The `set_mode` function checks the `mode` and calls the `raw_set_mode` function. The `raw_set_mode` calls the `set_mode` function for the selected card i.e. `card->set_mode(struct mode_info*)`. We can get access to this function from the `card_info` structure. Every video mode defines this structure with values filled depending upon the video mode (for example for `vga` it is the `video_vga.set_mode` function. See above example of `card_info` structure for `vga`). `video_vga.set_mode` is `vga_set_mode`, which checks the vga mode and calls the respective function:
 
@@ -271,7 +271,7 @@ After we have set video mode, we pass it to `boot_params.hdr.vid_mode`.
 
 Next `vesa_store_edid` is called. This function simply stores the [EDID](https://en.wikipedia.org/wiki/Extended_Display_Identification_Data) (**E**xtended **D**isplay **I**dentification **D**ata) information for kernel use. After this `store_mode_params` is called again. Lastly, if `do_restore` is set, the screen is restored to an earlier state.
 
-After this we have set video mode and now we can switch to the protected mode.
+After this, we have set video mode and now we can switch to the protected mode.
 
 Last preparation before transition into protected mode
 --------------------------------------------------------------------------------
@@ -290,9 +290,9 @@ outb(0x80, 0x70);	/* Disable NMI */
 io_delay();
 ```
 
-At first there is an inline assembly instruction with a `cli` instruction which clears the interrupt flag (`IF`). After this, external interrupts are disabled. The next line disables NMI (non-maskable interrupt).
+At first, there is an inline assembly instruction with a `cli` instruction which clears the interrupt flag (`IF`). After this, external interrupts are disabled. The next line disables NMI (non-maskable interrupt).
 
-An interrupt is a signal to the CPU which is emitted by hardware or software. After getting the signal, the CPU suspends the current instruction sequence, saves its state and transfers control to the interrupt handler. After the interrupt handler has finished it's work, it transfers control to the interrupted instruction. Non-maskable interrupts (NMI) are interrupts which are always processed, independently of permission. It cannot be ignored and is typically used to signal for non-recoverable hardware errors. We will not dive into details of interrupts now, but will discuss it in the next posts.
+An interrupt is a signal to the CPU which is emitted by hardware or software. After getting the signal, the CPU suspends the current instruction sequence, saves its state and transfers control to the interrupt handler. After the interrupt handler has finished it's work, it transfers control to the interrupted instruction. Non-maskable interrupts (NMI) are interrupts which are always processed, independently of permission. It cannot be ignored and is typically used to signal for non-recoverable hardware errors. We will not dive into details of interrupts now but will discuss it in the next posts.
 
 Let's get back to the code. We can see that second line is writing `0x80` (disabled bit) byte to `0x70` (CMOS Address register). After that, a call to the `io_delay` function occurs. `io_delay` causes a small delay and looks like:
 
@@ -332,9 +332,9 @@ static int a20_test(int loops)
 }
 ```
 
-First of all we put `0x0000` in the `FS` register and `0xffff` in the `GS` register. Next we read the value in address `A20_TEST_ADDR` (it is `0x200`) and put this value into the `saved` variable and `ctr`.
+First of all, we put `0x0000` in the `FS` register and `0xffff` in the `GS` register. Next, we read the value in address `A20_TEST_ADDR` (it is `0x200`) and put this value into the `saved` variable and `ctr`.
 
-Next we write an updated `ctr` value into `fs:gs` with the `wrfs32` function, then delay for 1ms, and then read the value from the `GS` register by address `A20_TEST_ADDR+0x10`, if it's not zero we already have enabled the A20 line. If A20 is disabled, we try to enable it with a different method which you can find in the `a20.c`. For example with call of `0x15` BIOS interrupt with `AH=0x2041` etc.
+Next, we write an updated `ctr` value into `fs:gs` with the `wrfs32` function, then delay for 1ms, and then read the value from the `GS` register by address `A20_TEST_ADDR+0x10`, if it's not zero we already have enabled the A20 line. If A20 is disabled, we try to enable it with a different method which you can find in the `a20.c`. For example with call of `0x15` BIOS interrupt with `AH=0x2041` etc.
 
 If the `enabled_a20` function finished with fail, print an error message and call function `die`. You can remember it from the first source code file where we started - [arch/x86/boot/header.S](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S):
 
@@ -374,7 +374,7 @@ static void setup_idt(void)
 }
 ```
 
-which sets up the Interrupt Descriptor Table (describes interrupt handlers and etc.). For now the IDT is not installed (we will see it later), but now we just the load IDT with the `lidtl` instruction. `null_idt` contains address and size of IDT, but now they are just zero. `null_idt` is a `gdt_ptr` structure, it as defined as:
+which sets up the Interrupt Descriptor Table (describes interrupt handlers and etc.). For now, the IDT is not installed (we will see it later), but now we just the load IDT with the `lidtl` instruction. `null_idt` contains address and size of IDT, but now they are just zero. `null_idt` is a `gdt_ptr` structure, it as defined as:
 ```C
 struct gdt_ptr {
 	u16 len;
@@ -431,7 +431,7 @@ Aligned - 16
 
 `GDT_ENTRY_BOOT_CS` has index - 2 here, `GDT_ENTRY_BOOT_DS` is `GDT_ENTRY_BOOT_CS + 1` and etc. It starts from 2, because first is a mandatory null descriptor (index - 0) and the second is not used (index - 1).
 
-`GDT_ENTRY` is a macro which takes flags, base and limit and builds GDT entry. For example let's look at the code segment entry. `GDT_ENTRY` takes following values:
+`GDT_ENTRY` is a macro which takes flags, base, limit and builds GDT entry. For example, let's look at the code segment entry. `GDT_ENTRY` takes following values:
 
 * base  - 0
 * limit - 0xfffff
@@ -447,9 +447,9 @@ in binary. Let's try to understand what every bit means. We will go through all
 
 * 1    - (G) granularity bit
 * 1    - (D) if 0 16-bit segment; 1 = 32-bit segment
-* 0    - (L) executed in 64 bit mode if 1
+* 0    - (L) executed in 64-bit mode if 1
 * 0    - (AVL) available for use by system software
-* 0000 - 4 bit length 19:16 bits in the descriptor
+* 0000 - 4-bit length 19:16 bits in the descriptor
 * 1    - (P) segment presence in memory
 * 00   - (DPL) - privilege level, 0 is the highest privilege
 * 1    - (S) code or data segment, not a system segment
@@ -494,9 +494,9 @@ which is defined in [arch/x86/boot/pmjump.S](https://github.com/torvalds/linux/b
 * address of protected mode entry point
 * address of `boot_params`
 
-Let's look inside `protected_mode_jump`. As I wrote above, you can find it in `arch/x86/boot/pmjump.S`. The first parameter will be in the `eax` register and second is in `edx`.
+Let's look inside `protected_mode_jump`. As I wrote above, you can find it in `arch/x86/boot/pmjump.S`. The first parameter will be in the `eax` register and the second one is in `edx`.
 
-First of all we put the address of `boot_params` in the `esi` register and the address of code segment register `cs` (0x1000) in `bx`. After this we shift `bx` by 4 bits and add the address of label `2` to it (we will have the physical address of label `2` in the `bx` after this) and jump to label `1`. Next we put data segment and task state segment in the `cs` and `di` registers with:
+First of all, we put the address of `boot_params` in the `esi` register and the address of code segment register `cs` (0x1000) in `bx`. After this, we shift `bx` by 4 bits and add the address of label `2` to it (we will have the physical address of label `2` in the `bx` after this) and jump to label `1`. Next we put data segment and task state segment in the `cs` and `di` registers with:
 
 ```assembly
 movw	$__BOOT_DS, %cx
@@ -505,7 +505,7 @@ movw	$__BOOT_TSS, %di
 
 As you can read above `GDT_ENTRY_BOOT_CS` has index 2 and every GDT entry is 8 byte, so `CS` will be `2 * 8 = 16`, `__BOOT_DS` is 24 etc.
 
-Next we set the `PE` (Protection Enable) bit in the `CR0` control register:
+Next, we set the `PE` (Protection Enable) bit in the `CR0` control register:
 
 ```assembly
 movl	%cr0, %edx
@@ -560,7 +560,7 @@ And jump to the 32-bit entry point in the end:
 jmpl	*%eax
 ```
 
-Remember that `eax` contains the address of the 32-bit entry (we passed it as first parameter into `protected_mode_jump`).
+Remember that `eax` contains the address of the 32-bit entry (we passed it as the first parameter into `protected_mode_jump`).
 
 That's all. We're in the protected mode and stop at it's entry point. We will see what happens next in the next part.
 
@@ -584,4 +584,3 @@ Links
 * [GCC designated inits](https://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Designated-Inits.html)
 * [GCC type attributes](https://gcc.gnu.org/onlinedocs/gcc/Type-Attributes.html)
 * [Previous part](linux-bootstrap-2.md)
-

Booting/linux-bootstrap-4.md

@@ -4,7 +4,7 @@ Kernel booting process. Part 4.
 Transition to 64-bit mode
 --------------------------------------------------------------------------------
 
-This is the fourth part of the `Kernel booting process` where we will see first steps in [protected mode](http://en.wikipedia.org/wiki/Protected_mode), like checking that cpu supports [long mode](http://en.wikipedia.org/wiki/Long_mode) and [SSE](http://en.wikipedia.org/wiki/Streaming_SIMD_Extensions), [paging](http://en.wikipedia.org/wiki/Paging), initializes the page tables and at the end we will discuss the transition to [long mode](https://en.wikipedia.org/wiki/Long_mode).
+This is the fourth part of the `Kernel booting process` where we will see first steps in [protected mode](http://en.wikipedia.org/wiki/Protected_mode), like checking that CPU supports [long mode](http://en.wikipedia.org/wiki/Long_mode) and [SSE](http://en.wikipedia.org/wiki/Streaming_SIMD_Extensions), [paging](http://en.wikipedia.org/wiki/Paging), initializes the page tables and at the end we will discuss the transition to [long mode](https://en.wikipedia.org/wiki/Long_mode).
 
 **NOTE: there will be much assembly code in this part, so if you are not familiar with that, you might want to consult a book about it**
 
@@ -41,7 +41,7 @@ fs             0x18	24
 gs             0x18	24
 ```
 
-We can see here that `cs` register contains - `0x10` (as you will remember from the previous part, this is the second index in the Global Descriptor Table), `eip` register is `0x100000` and base address of all segments including the code segment are zero. So we can get the physical address, it will be `0:0x100000` or just `0x100000`, as specified by the boot protocol. Now let's start with the 32-bit entry point.
+We can see here that `cs` register contains - `0x10` (as you will remember from the previous part, this is the second index in the Global Descriptor Table), `eip` register is `0x100000` and the base address of all segments including the code segment are zero. So we can get the physical address, it will be `0:0x100000` or just `0x100000`, as specified by the boot protocol. Now let's start with the 32-bit entry point.
 
 32-bit entry point
 --------------------------------------------------------------------------------
@@ -58,7 +58,7 @@ ENTRY(startup_32)
 ENDPROC(startup_32)
 ```
 
-First of all why `compressed` directory? Actually `bzimage` is a gzipped `vmlinux + header + kernel setup code`. We saw the kernel setup code in all of the previous parts. So, the main goal of the `head_64.S` is to prepare for entering long mode, enter into it and then decompress the kernel. We will see all of the steps up to kernel decompression in this part.
+First of all, why `compressed` directory? Actually `bzimage` is a gzipped `vmlinux + header + kernel setup code`. We saw the kernel setup code in all of the previous parts. So, the main goal of the `head_64.S` is to prepare for entering long mode, enter into it and then decompress the kernel. We will see all of the steps up to kernel decompression in this part.
 
 There were two files in the `arch/x86/boot/compressed` directory:
 
@@ -119,7 +119,7 @@ SECTIONS
 	}
 ```
 
-If you are not familiar with syntax of `GNU LD` linker scripting language, you can find more information in the [documentation](https://sourceware.org/binutils/docs/ld/Scripts.html#Scripts). In short, the `.` symbol is a special variable of linker - location counter. The value assigned to it is an offset relative to the offset of the segment. In our case we assign zero to location counter. This means that that our code is linked to run from the `0` offset in memory. Moreover, we can find this information in comments:
+If you are not familiar with the syntax of `GNU LD` linker scripting language, you can find more information in the [documentation](https://sourceware.org/binutils/docs/ld/Scripts.html#Scripts). In short, the `.` symbol is a special variable of linker - location counter. The value assigned to it is an offset relative to the offset of the segment. In our case, we assign zero to location counter. This means that our code is linked to run from the `0` offset in memory. Moreover, we can find this information in comments:
 
 ```
 Be careful parts of head_64.S assume startup_32 is at address 0.
@@ -129,7 +129,7 @@ Ok, now we know where we are, and now is the best time to look inside the `start
 
 In the beginning of the `startup_32` function, we can see the `cld` instruction which clears the `DF` bit in the [flags](https://en.wikipedia.org/wiki/FLAGS_register) register. When direction flag is clear, all string operations like [stos](http://x86.renejeschke.de/html/file_module_x86_id_306.html), [scas](http://x86.renejeschke.de/html/file_module_x86_id_287.html) and others will increment the index registers `esi` or `edi`. We need to clear direction flag because later we will use strings operations for clearing space for page tables, etc.
 
-After we have cleared the `DF` bit, next step is the check of the `KEEP_SEGMENTS` flag from `loadflags` kernel setup header field. If you remember we already saw `loadflags` in the very first [part](https://0xax.gitbooks.io/linux-insides/content/Booting/linux-bootstrap-1.html) of this book. There we checked `CAN_USE_HEAP` flag to get ability to use heap. Now we need to check the `KEEP_SEGMENTS` flag. This flags is described in the linux [boot protocol](https://www.kernel.org/doc/Documentation/x86/boot.txt) documentation:
+After we have cleared the `DF` bit, next step is the check of the `KEEP_SEGMENTS` flag from `loadflags` kernel setup header field. If you remember we already saw `loadflags` in the very first [part](https://0xax.gitbooks.io/linux-insides/content/Booting/linux-bootstrap-1.html) of this book. There we checked `CAN_USE_HEAP` flag to get ability to use heap. Now we need to check the `KEEP_SEGMENTS` flag. This flag is described in the linux [boot protocol](https://www.kernel.org/doc/Documentation/x86/boot.txt) documentation:
 
 ```
 Bit 6 (write): KEEP_SEGMENTS
@@ -137,7 +137,7 @@ Bit 6 (write): KEEP_SEGMENTS
   - If 0, reload the segment registers in the 32bit entry point.
   - If 1, do not reload the segment registers in the 32bit entry point.
     Assume that %cs %ds %ss %es are all set to flat segments with
-	a base of 0 (or the equivalent for their environment).
+		a base of 0 (or the equivalent for their environment).
 ```
 
 So, if the `KEEP_SEGMENTS` bit is not set in the `loadflags`, we need to reset `ds`, `ss` and `es` segment registers to a flat segment with base `0`. That we do:
@@ -153,9 +153,9 @@ So, if the `KEEP_SEGMENTS` bit is not set in the `loadflags`, we need to reset `
 	movl	%eax, %ss
 ```
 
-Remember that the `__BOOT_DS` is `0x18` (index of data segment in the [Global Descriptor Table](https://en.wikipedia.org/wiki/Global_Descriptor_Table)). If `KEEP_SEGMENTS` is set, we jump to the nearest `1f` label or update segment registers with `__BOOT_DS` if it is not set. It is pretty easy, but here is one interesting moment. If you've read the previous [part](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-3.md), you may remember that we already updated these segment registers right after we switched to [protected mode](https://en.wikipedia.org/wiki/Protected_mode) in [arch/x86/boot/pmjump.S](https://github.com/torvalds/linux/blob/master/arch/x86/boot/pmjump.S). So why do we need to care about values of segment registers again? The answer is easy. The Linux kernel also has a 32-bit boot protocol and if a bootloader uses it to load the Linux kernel all code before the `startup_32` will be missed. In this case, the `startup_32` will be first entry point of the Linux kernel right after bootloader and there are no guarantees that segment registers will be in known state.
+Remember that the `__BOOT_DS` is `0x18` (index of data segment in the [Global Descriptor Table](https://en.wikipedia.org/wiki/Global_Descriptor_Table)). If `KEEP_SEGMENTS` is set, we jump to the nearest `1f` label or update segment registers with `__BOOT_DS` if it is not set. It is pretty easy, but here is one interesting moment. If you've read the previous [part](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-3.md), you may remember that we already updated these segment registers right after we switched to [protected mode](https://en.wikipedia.org/wiki/Protected_mode) in [arch/x86/boot/pmjump.S](https://github.com/torvalds/linux/blob/master/arch/x86/boot/pmjump.S). So why do we need to care about values of segment registers again? The answer is easy. The Linux kernel also has a 32-bit boot protocol and if a bootloader uses it to load the Linux kernel all code before the `startup_32` will be missed. In this case, the `startup_32` will be the first entry point of the Linux kernel right after the bootloader and there are no guarantees that segment registers will be in known state.
 
-After we have checked the `KEEP_SEGMENTS` flag and put the correct value to the segment registers, the next step is to calculate difference between where we loaded and compiled to run. Remember that `setup.ld.S` contains following definition: `. = 0` at the start of the `.head.text` section. This means that the code in this section is compiled to run from `0` address. We can see this in `objdump` output:
+After we have checked the `KEEP_SEGMENTS` flag and put the correct value to the segment registers, the next step is to calculate the difference between where we loaded and compiled to run. Remember that `setup.ld.S` contains following definition: `. = 0` at the start of the `.head.text` section. This means that the code in this section is compiled to run from `0` address. We can see this in `objdump` output:
 
 ```
 arch/x86/boot/compressed/vmlinux:     file format elf64-x86-64
@@ -168,14 +168,14 @@ Disassembly of section .head.text:
    1:   f6 86 11 02 00 00 40    testb  $0x40,0x211(%rsi)
 ```
 
-The `objdump` util tells us that the address of the `startup_32` is `0`. But actually it is not so. Our current goal is to know where actually we are. It is pretty simple to do in [long mode](https://en.wikipedia.org/wiki/Long_mode), because it support `rip` relative addressing, but currently we are in [protected mode](https://en.wikipedia.org/wiki/Protected_mode). We will use common pattern to know the address of the `startup_32`. We need to define a label and make a call to this label and pop the top of the stack to a register:
+The `objdump` util tells us that the address of the `startup_32` is `0` but actually it's not so. Our current goal is to know where actually we are. It is pretty simple to do in [long mode](https://en.wikipedia.org/wiki/Long_mode) because it support `rip` relative addressing but currently we are in [protected mode](https://en.wikipedia.org/wiki/Protected_mode). We will use common pattern to know the address of the `startup_32`. We need to define a label and make a call to this label and pop the top of the stack to a register:
 
 ```assembly
 call label
 label: pop %reg
 ```
 
-After this a register will contain the address of a label. Let's look to the similar code which search address of the `startup_32` in the Linux kernel:
+After this, a register will contain the address of a label. Let's look at the similar code which searches address of the `startup_32` in the Linux kernel:
 
 ```assembly
 	leal	(BP_scratch+4)(%esi), %esp
@@ -184,7 +184,7 @@ After this a register will contain the address of a label. Let's look to the sim
 	subl	$1b, %ebp
 ```
 
-As you remember from the previous part, the `esi` register contains the address of the [boot_params](https://github.com/torvalds/linux/blob/master/arch/x86/include/uapi/asm/bootparam.h#L113) structure which was filled before we moved to the protected mode. The `boot_params` structure contains a special field `scratch` with offset `0x1e4`. These four bytes field will be temporary stack for `call` instruction. We are getting the address of the `scratch` field + 4 bytes and putting it in the `esp` register. We add `4` bytes to the base of the `BP_scratch` field because, as just described, it will be a temporary stack and the stack grows from top to down in `x86_64` architecture. So our stack pointer will point to the top of the stack. Next we can see the pattern that I've described above. We make a call to the `1f` label and put the address of this label to the `ebp` register, because we have return address on the top of stack after the `call` instruction will be executed. So, for now we have an address of the `1f` label and now it is easy to get address of the `startup_32`. We just need to subtract address of label from the address which we got from the stack:
+As you remember from the previous part, the `esi` register contains the address of the [boot_params](https://github.com/torvalds/linux/blob/master/arch/x86/include/uapi/asm/bootparam.h#L113) structure which was filled before we moved to the protected mode. The `boot_params` structure contains a special field `scratch` with offset `0x1e4`. These four bytes field will be temporary stack for `call` instruction. We are getting the address of the `scratch` field + 4 bytes and putting it in the `esp` register. We add `4` bytes to the base of the `BP_scratch` field because, as just described, it will be a temporary stack and the stack grows from top to down in `x86_64` architecture. So our stack pointer will point to the top of the stack. Next, we can see the pattern that I've described above. We make a call to the `1f` label and put the address of this label to the `ebp` register because we have return address on the top of stack after the `call` instruction will be executed. So, for now we have an address of the `1f` label and now it is easy to get address of the `startup_32`. We just need to subtract address of label from the address which we got from the stack:
 
 ```
 startup_32 (0x0)     +-----------------------+
@@ -248,7 +248,7 @@ Ok, that's true. The address of the `startup_32` is `0x100000`. After we know th
 Stack setup and CPU verification
 --------------------------------------------------------------------------------
 
-We could not setup the stack while we did not know the address of the `startup_32` label. We can imagine the stack as an array and the stack pointer register `esp` must point to the end of this array. Of course we can define an array in our code, but we need to know its actual address to configure the stack pointer in a correct way. Let's look at the code:
+We could not setup the stack while we did not know the address of the `startup_32` label. We can imagine the stack as an array and the stack pointer register `esp` must point to the end of this array. Of course, we can define an array in our code, but we need to know its actual address to configure the stack pointer in a correct way. Let's look at the code:
 
 ```assembly
 	movl	$boot_stack_end, %eax
@@ -278,7 +278,7 @@ After we have set up the stack, next step is CPU verification. As we are going t
 	jnz	no_longmode
 ```
 
-This function defined in the [arch/x86/kernel/verify_cpu.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/verify_cpu.S) assembly file and just contains a couple of calls to the [cpuid](https://en.wikipedia.org/wiki/CPUID) instruction. This instruction is used for getting information about the processor. In our case it checks `long mode` and `SSE` support and returns `0` on success or `1` on fail in the `eax` register.
+This function defined in the [arch/x86/kernel/verify_cpu.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/verify_cpu.S) assembly file and just contains a couple of calls to the [cpuid](https://en.wikipedia.org/wiki/CPUID) instruction. This instruction is used for getting information about the processor. In our case, it checks `long mode` and `SSE` support and returns `0` on success or `1` on fail in the `eax` register.
 
 If the value of the `eax` is not zero, we jump to the `no_longmode` label which just stops the CPU by the call of the `hlt` instruction while no hardware interrupt will not happen:
 
@@ -294,7 +294,7 @@ If the value of the `eax` register is zero, everything is ok and we are able to
 Calculate relocation address
 --------------------------------------------------------------------------------
 
-The next step is calculating relocation address for decompression if needed. First we need to know what it means for a kernel to be `relocatable`. We already know that the base address of the 32-bit entry point of the Linux kernel is `0x100000`, but that is a 32-bit entry point. The default base address of the Linux kernel is determined by the value of the `CONFIG_PHYSICAL_START` kernel configuration option. Its default value is `0x1000000` or `16 MB`. The main problem here is that if the Linux kernel crashes, a kernel developer must have a `rescue kernel` for [kdump](https://www.kernel.org/doc/Documentation/kdump/kdump.txt) which is configured to load from a different address. The Linux kernel provides special configuration option to solve this problem: `CONFIG_RELOCATABLE`. As we can read in the documentation of the Linux kernel:
+The next step is calculating relocation address for decompression if needed. First, we need to know what it means for a kernel to be `relocatable`. We already know that the base address of the 32-bit entry point of the Linux kernel is `0x100000`, but that is a 32-bit entry point. The default base address of the Linux kernel is determined by the value of the `CONFIG_PHYSICAL_START` kernel configuration option. Its default value is `0x1000000` or `16 MB`. The main problem here is that if the Linux kernel crashes, a kernel developer must have a `rescue kernel` for [kdump](https://www.kernel.org/doc/Documentation/kdump/kdump.txt) which is configured to load from a different address. The Linux kernel provides special configuration option to solve this problem: `CONFIG_RELOCATABLE`. As we can read in the documentation of the Linux kernel:
 
 ```
 This builds a kernel image that retains relocation information
@@ -305,7 +305,7 @@ it has been loaded at and the compile time physical address
 (CONFIG_PHYSICAL_START) is used as the minimum location.
 ```
 
-In simple terms this means that the Linux kernel with the same configuration can be booted from different addresses. Technically, this is done by compiling the decompressor as [position independent code](https://en.wikipedia.org/wiki/Position-independent_code). If we look at [arch/x86/boot/compressed/Makefile](https://github.com/torvalds/linux/blob/master/arch/x86/boot/compressed/Makefile), we will see that the decompressor is indeed compiled with the `-fPIC` flag:
+In simple terms, this means that the Linux kernel with the same configuration can be booted from different addresses. Technically, this is done by compiling the decompressor as [position independent code](https://en.wikipedia.org/wiki/Position-independent_code). If we look at [arch/x86/boot/compressed/Makefile](https://github.com/torvalds/linux/blob/master/arch/x86/boot/compressed/Makefile), we will see that the decompressor is indeed compiled with the `-fPIC` flag:
 
 ```Makefile
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -339,12 +339,12 @@ Remember that the value of the `ebp` register is the physical address of the `st
 
 As we can see it just expands to the aligned `CONFIG_PHYSICAL_ALIGN` value which represents the physical address of where to load the kernel. After comparison of the `LOAD_PHYSICAL_ADDR` and value of the `ebx` register, we add the offset from the `startup_32` where to decompress the compressed kernel image. If the `CONFIG_RELOCATABLE` option is not enabled during kernel configuration, we just put the default address where to load kernel and add `z_extract_offset` to it.
 
-After all of these calculations we will have `ebp` which contains the address where we loaded it and `ebx` set to the address of where kernel will be moved after decompression.
+After all of these calculations, we will have `ebp` which contains the address where we loaded it and `ebx` set to the address of where kernel will be moved after decompression.
 
 Preparation before entering long mode
 --------------------------------------------------------------------------------
 
-When we have the base address where we will relocate the compressed kernel image, we need to do one last step before we can transition to 64-bit mode. First we need to update the [Global Descriptor Table](https://en.wikipedia.org/wiki/Global_Descriptor_Table):
+When we have the base address where we will relocate the compressed kernel image, we need to do one last step before we can transition to 64-bit mode. First, we need to update the [Global Descriptor Table](https://en.wikipedia.org/wiki/Global_Descriptor_Table):
 
 ```assembly
 	leal	gdt(%ebp), %eax
@@ -368,7 +368,7 @@ gdt:
 gdt_end:
 ```
 
-We can see that it is located in the `.data` section and contains five descriptors: `null` descriptor, kernel code segment, kernel data segment and two task descriptors. We already loaded the `Global Descriptor Table` in the previous [part](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-3.md), and now we're doing almost the same here, but descriptors with `CS.L = 1` and `CS.D = 0` for execution in `64` bit mode. As we can see, the definition of the `gdt` starts from two bytes: `gdt_end - gdt` which represents last byte in the `gdt` table or table limit. The next four bytes contains base address of the `gdt`. Remember that the `Global Descriptor Table` is stored in the `48-bits GDTR` which consists of two parts:
+We can see that it is located in the `.data` section and contains five descriptors: `null` descriptor, kernel code segment, kernel data segment and two task descriptors. We already loaded the `Global Descriptor Table` in the previous [part](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-3.md), and now we're doing almost the same here, but descriptors with `CS.L = 1` and `CS.D = 0` for execution in `64` bit mode. As we can see, the definition of the `gdt` starts from two bytes: `gdt_end - gdt` which represents the last byte in the `gdt` table or table limit. The next four bytes contains base address of the `gdt`. Remember that the `Global Descriptor Table` is stored in the `48-bits GDTR` which consists of two parts:
 
 * size(16-bit) of global descriptor table;
 * address(32-bit) of the global descriptor table.
@@ -388,7 +388,7 @@ Now we are almost finished with all preparations before we can move into 64-bit
 Long mode
 --------------------------------------------------------------------------------
 
-[Long mode](https://en.wikipedia.org/wiki/Long_mode) is the native mode for [x86_64](https://en.wikipedia.org/wiki/X86-64) processors. First let's look at some differences between `x86_64` and the `x86`.
+[Long mode](https://en.wikipedia.org/wiki/Long_mode) is the native mode for [x86_64](https://en.wikipedia.org/wiki/X86-64) processors. First, let's look at some differences between `x86_64` and the `x86`.
 
 The `64-bit` mode provides features such as:
 
@@ -425,7 +425,7 @@ The Linux kernel uses `4-level` paging, and we generally build 6 page tables:
 * One `PDP` or `Page Directory Pointer` table with four entries;
 * Four Page Directory tables with a total of `2048` entries.
 
-Let's look at the implementation of this. First of all we clear the buffer for the page tables in memory. Every table is `4096` bytes, so we need clear `24` kilobyte buffer:
+Let's look at the implementation of this. First of all, we clear the buffer for the page tables in memory. Every table is `4096` bytes, so we need clear `24` kilobyte buffer:
 
 ```assembly
 	leal	pgtable(%ebx), %edi
@@ -455,7 +455,7 @@ After we have got buffer for the `pgtable` structure, we can start to build the
 	movl	%eax, 0(%edi)
 ```
 
-Here again, we put the address of the `pgtable` relative to `ebx` or in other words relative to address of the `startup_32` to the `edi` register. Next we put this address with offset `0x1007` in the `eax` register. The `0x1007` is `4096` bytes which is the size of the `PML4` plus `7`. The `7` here represents flags of the `PML4` entry. In our case, these flags are `PRESENT+RW+USER`. In the end we just write first the address of the first `PDP` entry to the `PML4`.
+Here again, we put the address of the `pgtable` relative to `ebx` or in other words relative to address of the `startup_32` to the `edi` register. Next, we put this address with offset `0x1007` in the `eax` register. The `0x1007` is `4096` bytes which is the size of the `PML4` plus `7`. The `7` here represents flags of the `PML4` entry. In our case, these flags are `PRESENT+RW+USER`. In the end, we just write first the address of the first `PDP` entry to the `PML4`.
 
 In the next step we will build four `Page Directory` entries in the `Page Directory Pointer` table with the same `PRESENT+RW+USE` flags:
 
@@ -483,7 +483,7 @@ We put the base address of the page directory pointer which is `4096` or `0x1000
 	jnz	1b
 ```
 
-Here we do almost the same as in the previous example, all entries will be with flags - `$0x00000183` - `PRESENT + WRITE + MBZ`. In the end we will have `2048` pages with `2-MByte` page or:
+Here we do almost the same as in the previous example, all entries will be with flags - `$0x00000183` - `PRESENT + WRITE + MBZ`. In the end, we will have `2048` pages with `2-MByte` page or:
 
 ```python
 >>> 2048 * 0x00200000
@@ -513,7 +513,7 @@ First of all we need to set the `EFER.LME` flag in the [MSR](http://en.wikipedia
 
 Here we put the `MSR_EFER` flag (which is defined in [arch/x86/include/uapi/asm/msr-index.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/uapi/asm/msr-index.h#L7)) in the `ecx` register and call `rdmsr` instruction which reads the [MSR](http://en.wikipedia.org/wiki/Model-specific_register) register. After `rdmsr` executes, we will have the resulting data in `edx:eax` which depends on the `ecx` value. We check the `EFER_LME` bit with the `btsl` instruction and write data from `eax` to the `MSR` register with the `wrmsr` instruction.
 
-In the next step we push the address of the kernel segment code to the stack (we defined it in the GDT) and put the address of the `startup_64` routine in `eax`.
+In the next step, we push the address of the kernel segment code to the stack (we defined it in the GDT) and put the address of the `startup_64` routine in `eax`.
 
 ```assembly
 	pushl	$__KERNEL_CS
@@ -553,7 +553,7 @@ Conclusion
 
 This is the end of the fourth part linux kernel booting process. If you have questions or suggestions, ping me in twitter [0xAX](https://twitter.com/0xAX), drop me [email](anotherworldofworld@gmail.com) or just create an [issue](https://github.com/0xAX/linux-insides/issues/new).
 
-In the next part we will see kernel decompression and many more.
+In the next part, we will see kernel decompression and much more.
 
 **Please note that English is not my first language and I am really sorry for any inconvenience. If you find any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-internals).**