|
|
@@ -371,7 +371,7 @@ push `ds` value to stack, and address of [6](https://github.com/torvalds/linux/b
|
|
|
Stack Setup
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
|
|
-Actually, almost all of the setup code is preparation for the C language environment in real mode. The next [step](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L467) is checking of `ss` register value and make a correct stack if `ss` is wrong:
|
|
|
+Actually, almost all of the setup code is preparation for the C language environment in real mode. The next [step](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L467) is checking the `ss` register value and making a correct stack if `ss` is wrong:
|
|
|
|
|
|
```assembly
|
|
|
movw %ss, %dx
|
|
|
@@ -399,11 +399,11 @@ Let's look at all three of these scenarios:
|
|
|
sti
|
|
|
```
|
|
|
|
|
|
-Here we can see aligning of `dx` (contains `sp` given by bootloader) to 4 bytes and checking whether it is zero. If it is zero, we put `0xfffc` (4 byte aligned address before maximum segment size - 64 KB) in `dx`. If it is not zero we continue to use `sp` given by the bootloader (0xf7f4 in my case). After this we put the `ax` value to `ss` which stores the correct segment address of `0x10000` and sets up a correct `sp`. We now have a correct stack:
|
|
|
+Here we can see the alignment of `dx` (contains `sp` given by bootloader) to 4 bytes and a check for whether or not it is zero. If it is zero, we put `0xfffc` (4 byte aligned address before maximum segment size - 64 KB) in `dx`. If it is not zero we continue to use `sp` given by the bootloader (0xf7f4 in my case). After this we put the `ax` value to `ss` which stores the correct segment address of `0x10000` and sets up a correct `sp`. We now have a correct stack:
|
|
|
|
|
|
|
|
|
|
|
|
-2. In the second scenario, (`ss` != `ds`). First of all put the [_end](https://github.com/torvalds/linux/blob/master/arch/x86/boot/setup.ld#L52) (address of end of setup code) value in `dx` and check the `loadflags` header field with the `testb` instruction too see whether we can use heap or not. [loadflags](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L321) is a bitmask header which is defined as:
|
|
|
+2. In the second scenario, (`ss` != `ds`). First of all put the [_end](https://github.com/torvalds/linux/blob/master/arch/x86/boot/setup.ld#L52) (address of end of setup code) value in `dx` and check the `loadflags` header field with the `testb` instruction to see whether we can use the heap or not. [loadflags](https://github.com/torvalds/linux/blob/master/arch/x86/boot/header.S#L321) is a bitmask header which is defined as:
|
|
|
|
|
|
```C
|
|
|
#define LOADED_HIGH (1<<0)
|
0xAX